CLEANING SOLVENT DEGREASER
WITH EXTRA-STRONG SOLVENT POWER
FAST EVAPORATION RATE 15 MINUTES AT 20°C (ZERO AIR FLOW)
SPECIALLY FORMULATED FOR DIFFICULT DEGREASING OPERATIONS
ELIMINATION OF BURNT-ON GREASES, DRIED MINERAL AND VEGETABLE OILS
TRACES OF VEGETABLE RESINS, CONTACT ADHESIVES, FRESH INKS, MASKING,
REQUIRING FAST ACTION
FLASHPOINT NOT MEASURABLE
GUARANTEED FREE FROM GREENHOUSE
FLUORINATED COMPOUNDS WITH A GWP above 150
EU Regulation 517/2014 F. Gas Directive
prohibited from 1st January 2018
DESCRIPTION
NEUTRALÈNE® 2015 is a degreaser developed to cope with extreme cases
Flashpoint not measurable
Ultra-fast evaporation
Solvent power suitable for all requirements
Compatible with most substrates
APPLICATIONS
NEUTRALÈNE® 2015 eliminates all contaminants such as:
Lubricants for maintenance.
Cutting products, temporary protection for construction, varnishes, sliding in mechanical construction.
Animal greases, lanolin, tallow, spermaceti oil, sodium tallowate, lard.
Vegetable oils, such as palm oil or grease, castor oil, rapeseed oil, sunflower oil, dried oils.
Petroleum waxes, paraffins.
Microcrystalline waxes.
Residues of glues, of non-polymerised seals, traces of adhesives, colophane solder flux.
APPLICATIONS
Mixing, conditioning and packaging installations.
Mechanical construction, metal processing.
Maintenance and cleaning in industrial environments.
Production, assembly, and fitting lines.
Creation of electrical and electronic components.
Degreasing operations before metrological inspection.
Degreasing of measuring and test instruments.
Washing of optics, clock mechanisms, metering equipment, sighting equipment.
PHYSICO-CHEMICAL PROPERTIES
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
Appearance |
Visual |
Fluid |
- |
|
Colour |
Visual |
Colourless |
- |
|
Scent |
Olfactory |
Low |
- |
|
Density at 25°C |
NF EN ISO 12185 |
780 |
kg/m3 |
|
Refraction index |
ISO 5661 |
1.4080 |
- |
|
Freezing point |
ISO 3016 |
-65 |
°C |
|
Water solubility |
- |
Partial |
% |
|
Kinematic viscosity at 40°C |
NF EN 3104 |
0.85 |
mm²/s |
|
Acid index |
EN 14104 |
0.1 |
mg(KOH)/g |
|
Iodine index |
NF EN 14111 |
nm |
gI2/100g |
|
Water content |
NF ISO 6296 |
0.025 |
% |
|
Residue after evaporation |
NF T 30-084 |
0 |
% |
|
Steam pressure at 20°C |
NF EN 13016-1 |
> 0.01 |
hPa |
|
PERFORMANCE PROPERTIES |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
KB index |
ASTM D 1133 |
117 |
- |
|
Evaporation speed |
- |
15 |
min. |
|
Surface tension at 20°C |
ISO 6295 |
25 |
dyne/cm |
|
Breakdown voltage |
NF EN 60156/IEC 156 |
nm |
Volts |
|
Copper blade corrosion 100 h at 40°C |
ISO 2160 |
1a |
Measured value |
|
FIRE SAFETY PROPERTIES |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
Flashpoint (closed tank) |
ISO 2719 |
not measurable |
°C |
|
Self-combustion point |
ASTM E 659 |
> 240 |
°C |
|
Lower Explosive Limit |
NF EN 1839 |
0.7 |
% (volume) |
|
Upper Explosive Limit |
NF EN 1839 |
13,7 |
% (volume) |
|
Explosive, oxidising agent, flammable, highly or extremely flammable substance content |
CLP Regulation |
- |
% |
|
TOXICOLOGICAL PROPERTIES |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
Anisidine index |
NF ISO 6885 |
nm |
- |
|
Peroxide index |
NF ISO 3960 |
nm |
meq(O2)/kg |
|
TOTOX (anisidine index+2x peroxide index) |
- |
nm |
- |
|
CMR, irritant and corrosive substance content |
CLP Regulation |
0 |
% |
|
Residual methanol content from transesterification |
GC-MS |
0 |
% |
|
Emissions of hazardous compounds, CMR, irritants, corrosive at 160°C |
GC-MS |
0 |
% |
|
ENVIRONMENTAL PROPERTIES |
|||
|
PROPERTIES |
STANDARDS |
VALUES |
UNITS |
|
Biodegradability |
OECD 301 |
nm |
- |
|
Steam pressure at 20°C |
- |
> 0.01 |
hPa |
|
VOC content (Volatile Organic Compounds) |
- |
100 |
% |
|
Sulphur content |
GC MS |
0 |
% |
|
Benzene content |
ASTM D6229 |
0 |
% |
|
Total halogen content |
GC MS |
- |
% |
|
Chlorinated solvent content |
- |
0 |
|
|
Aromatic solvent content |
- |
0 |
|
|
Environmentally-hazardous substance content |
CLP Regulation |
0 |
% |
|
Content of compounds with GWP |
- |
< 1 |
% |
|
Content of compounds with ODP |
- |
0 |
% |
|
Carbon assessment, life cycles analysis. |
ISO 14040 |
nm |
Kg carbon equivalent |
PRESENTATIONS
|
IBC GRV 1000 L
|
Drum 200 L
|
Keg 25 L
|
INSTRUCTIONS FOR USE
|
|
|
|
Degreasing with rag |
Degreasing with brush |
 |
|
|
Ultrasound tanks |
Hot or cold immersion tanks |
Looking for another product?
|
Discover our entire range by clicking on the photo |
Manufacturing, lubrification, cleansing, protection,
IBiotec® Tec Industries® Service
offers a wide range of products reserved for industrial area
If you wish for :
a free sample
a technical advice
a product data sheet
a safety data sheet
IBiotec® Tec Industries®Service
manufacturer of technical chemical products.
Welcome to our website.
IBiotec® Tec Industries®Service is on : 